一、安装gitlab
清华大学镜像网站下载对应的rpm包
https://mirrors.tuna.tsinghua.edu.cn/gitlab-ce/yum/el6/gitlab-ce-12.0.3-ce.0.el6.x86_64.rpm
[root@admin Downloads]# rpm -ivh gitlab-ce-12.0.3-ce.0.el6.x86_64.rpm
warning: gitlab-ce-12.0.3-ce.0.el6.x86_64.rpm: Header V4 RSA/SHA1 Signature, key ID f27eab47: NOKEY
error: Failed dependencies:
openssh-server is needed by gitlab-ce-12.0.3-ce.0.el6.x86_64
从http://www.rpmfind.net/linux/centos/6.10/updates/x86_64/Packages/openssh-server-5.3p1-124.el6_10.x86_64.rpm下载openssh-server的rpm包。
安装openssh-server时又遇到openssh依赖,如下:
[root@admin Downloads]# rpm -ivh openssh-server-5.3p1-124.el6_10.x86_64.rpm
warning: openssh-server-5.3p1-124.el6_10.x86_64.rpm: Header V3 RSA/SHA1 Signature, key ID c105b9de: NOKEY
error: Failed dependencies:
openssh = 5.3p1-124.el6_10 is needed by openssh-server-5.3p1-124.el6_10.x86_64
从http://www.rpmfind.net/linux/centos/6.10/updates/x86_64/Packages/openssh-5.3p1-124.el6_10.x86_64.rpm下载openssh的rpm包。安装后即可顺利安装openssh-server和gitlab。
[root@admin Downloads]# rpm -ivh openssh-5.3p1-124.el6_10.x86_64.rpm
warning: openssh-5.3p1-124.el6_10.x86_64.rpm: Header V3 RSA/SHA1 Signature, key ID c105b9de: NOKEY
Preparing... ########################################### [100%]
1:openssh warning: /etc/ssh/moduli created as /etc/ssh/moduli.rpmnew
########################################### [100%]
[root@admin Downloads]# rpm -ivh openssh-server-5.3p1-124.el6_10.x86_64.rpm
warning: openssh-server-5.3p1-124.el6_10.x86_64.rpm: Header V3 RSA/SHA1 Signature, key ID c105b9de: NOKEY
Preparing... ########################################### [100%]
1:openssh-server warning: /etc/pam.d/sshd created as /etc/pam.d/sshd.rpmnew
warning: /etc/ssh/sshd_config created as /etc/ssh/sshd_config.rpmnew
########################################### [100%]
[root@admin Downloads]# rpm -ivh gitlab-ce-12.0.3-ce.0.el6.x86_64.rpm
warning: gitlab-ce-12.0.3-ce.0.el6.x86_64.rpm: Header V4 RSA/SHA1 Signature, key ID f27eab47: NOKEY
Preparing... ########################################### [100%]
1:gitlab-ce ########################################### [100%]
It looks like GitLab has not been configured yet; skipping the upgrade script.
*. *.
*** ***
***** *****
.****** *******
******** ********
,,,,,,,,,***********,,,,,,,,,
,,,,,,,,,,,*********,,,,,,,,,,,
.,,,,,,,,,,,*******,,,,,,,,,,,,
,,,,,,,,,*****,,,,,,,,,.
,,,,,,,****,,,,,,
.,,,***,,,,
,*,.
_______ __ __ __
/ ____(_) /_/ / ____ _/ /_
/ / __/ / __/ / / __ `/ __ \
/ /_/ / / /_/ /___/ /_/ / /_/ /
\____/_/\__/_____/\__,_/_.___/
Thank you for installing GitLab!
GitLab was unable to detect a valid hostname for your instance.
Please configure a URL for your GitLab instance by setting `external_url`
configuration in /etc/gitlab/gitlab.rb file.
Then, you can start your GitLab instance by running the following command:
sudo gitlab-ctl reconfigure
For a comprehensive list of configuration options please see the Omnibus GitLab readme
https://gitlab.com/gitlab-org/omnibus-gitlab/blob/master/README.md
二、配置gitlab
gitlab内置了nginx的服务,所以默认会占用80和443端口。如果服务器上之前安装过nginx或者apache,把80和443端口给占了,就需要修改端口防止冲突。但是如果修改了端口,访问的时候就要带上端口号,比较麻烦且看起来不好看。比较好的办法是使用自己安装的nginx做反向代理,连接到gitlab的nginx。
1. 安装nginx
http://nginx.org/packages/rhel/6/x86_64/RPMS/nginx-1.16.0-1.el6.ngx.x86_64.rpm 下载rpm包,
[root@admin Downloads]# rpm -ivh nginx-1.16.0-1.el6.ngx.x86_64.rpm
warning: nginx-1.16.0-1.el6.ngx.x86_64.rpm: Header V4 RSA/SHA1 Signature, key ID 7bd9bf62: NOKEY
Preparing... ########################################### [100%]
1:nginx ########################################### [100%]
----------------------------------------------------------------------
Thanks for using nginx!
Please find the official documentation for nginx here:
* http://nginx.org/en/docs/
Please subscribe to nginx-announce mailing list to get
the most important news about nginx:
* http://nginx.org/en/support.html
Commercial subscriptions for nginx are available on:
* http://nginx.com/products/
----------------------------------------------------------------------
启动nginx:
#显示nginx的配置路径
[root@admin Downloads]# nginx -t
nginx: the configuration file /etc/nginx/nginx.conf syntax is ok
nginx: configuration file /etc/nginx/nginx.conf test is successful
#启动nginx并检查进程和监听端口
[root@admin Downloads]# nginx
[root@admin Downloads]# ps -ef | grep nginx
root 121141 1 0 19:26 ? 00:00:00 nginx: master process nginx
nginx 121142 121141 0 19:26 ? 00:00:00 nginx: worker process
root 121144 115450 0 19:26 pts/17 00:00:00 grep nginx
[root@admin Downloads]# netstat -anp | grep 80
tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 121141/nginx
nginx启动后,可以从浏览器访问主机地址的80端口,如下:
2. 配置nginx并重启
编辑nginx的配置文件/etc/nginx/nginx.conf, 改配置的全部内容如下:
user nginx;
worker_processes 1;
error_log /var/log/nginx/error.log warn;
pid /var/run/nginx.pid;
events {
worker_connections 1024;
}
http {
include /etc/nginx/mime.types;
default_type application/octet-stream;
log_format main '$remote_addr - $remote_user [$time_local] "$request" '
'$status $body_bytes_sent "$http_referer" '
'"$http_user_agent" "$http_x_forwarded_for"';
access_log /var/log/nginx/access.log main;
sendfile on;
#tcp_nopush on;
keepalive_timeout 65;
#gzip on;
include /etc/nginx/conf.d/*.conf;
upstream gitlab-workhorse {
server localhost:8181; //这里对应的是gitlab配置文件中定义的IP地址和端口号
}
server {
listen 80;
listen [::]:80 default_server;
server_name 10.0.74.179; //这里用IP地址或者用域名
server_tokens off; ## Don't show the nginx version number, a security best practice
root /opt/gitlab/embedded/service/gitlab-rails/public;
## See app/controllers/application_controller.rb for headers set
## Individual nginx logs for this GitLab vhost
#access_log /home/wwwlogs/gitlab_access.log; # 根据实际情况修改
#error_log /home/wwwlogs/gitlab_error.log; # 根据实际情况修改
location / {
# 设置最大允许上传单个的文件大小
client_max_body_size 1024m;
gzip off;
proxy_redirect off;
proxy_http_version 1.1;
#以下确保 gitlab中项目的 url 是域名而不是 http://git,不可缺少
proxy_set_header Host $host;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_set_header X-Forwarded-Proto $scheme;
# 反向代理到 gitlab
proxy_pass http://gitlab-workhorse;
}
}
}
配置完成后重新启动一下nginx,如下:
# 检测配置是否正确
$ nginx -t
# 重启nginx
$ nginx -s reload
#停止nginx
$ service nginx stop
#启动nginx
$ service nginx start
3. 配置gitlab并重启
编辑gitlab的配置文件/etc/gitlab/gitlab.rb,需要更改的内容如下:
external_url 'http://10.0.74.179' #这里是域名或者IP地址
gitlab_workhorse['listen_network'] = "tcp"
gitlab_workhorse['listen_addr'] = "localhost:8181" #这里要与nginx配置中的代理指向的地址一致
unicorn['port'] = 8182 #unicorn的监听端口,不能与其他应用的监听端口冲突,否则会出错
web_server['external_users'] = ['nginx'] #这个user要跟nginx配置中的user一致
nginx['enable'] = false #关闭gitlab中自带的nginx
使用下面命令中的reconfigure命令来更新配置并重启:
#开启
gitlab-ctl start
#关闭
gitlab-ctl stop
#重启
gitlab-ctl restart
#重新配置并重启 -- 一般修改了配置文件后都要运行改命令
gitlab-ctl reconfigure
#查看状态
gitlab-ctl status
4. 从浏览器输入IP地址访问gitlab,安装成功的话会看到如下界面:
首次登陆会要求重置管理员密码,管理员的默认用户名为root。
参考资料:
【1】https://www.centos.bz/2018/01/centos-7-x%E4%B8%8Agitlab%E6%90%AD%E5%BB%BA%E6%95%99%E7%A8%8Bhttps%E5%8F%AF%E7%94%A8%EF%BC%8C%E9%82%AE%E4%BB%B6%E5%8F%AF%E7%94%A8/ CentOS 7.x上gitlab搭建教程(https可用,邮件可用)
【2】https://www.cnblogs.com/xudong-bupt/p/8661523.html 正向代理与反向代理区别图解 (nginx)
文章浏览阅读1.6k次。安装配置gi、安装数据库软件、dbca建库见下:http://blog.csdn.net/kadwf123/article/details/784299611、检查集群节点及状态:[root@rac2 ~]# olsnodes -srac1 Activerac2 Activerac3 Activerac4 Active[root@rac2 ~]_12c查看crs状态
文章浏览阅读1.3w次,点赞45次,收藏99次。我个人用的是anaconda3的一个python集成环境,自带jupyter notebook,但在我打开jupyter notebook界面后,却找不到对应的虚拟环境,原来是jupyter notebook只是通用于下载anaconda时自带的环境,其他环境要想使用必须手动下载一些库:1.首先进入到自己创建的虚拟环境(pytorch是虚拟环境的名字)activate pytorch2.在该环境下下载这个库conda install ipykernelconda install nb__jupyter没有pytorch环境
文章浏览阅读5.2k次,点赞19次,收藏28次。选择scoop纯属意外,也是无奈,因为电脑用户被锁了管理员权限,所有exe安装程序都无法安装,只可以用绿色软件,最后被我发现scoop,省去了到处下载XXX绿色版的烦恼,当然scoop里需要管理员权限的软件也跟我无缘了(譬如everything)。推荐添加dorado这个bucket镜像,里面很多中文软件,但是部分国外的软件下载地址在github,可能无法下载。以上两个是官方bucket的国内镜像,所有软件建议优先从这里下载。上面可以看到很多bucket以及软件数。如果官网登陆不了可以试一下以下方式。_scoop-cn
文章浏览阅读4.5k次,点赞2次,收藏3次。首先要有一个color-picker组件 <el-color-picker v-model="headcolor"></el-color-picker>在data里面data() { return {headcolor: ’ #278add ’ //这里可以选择一个默认的颜色} }然后在你想要改变颜色的地方用v-bind绑定就好了,例如:这里的:sty..._vue el-color-picker
文章浏览阅读640次。基于芯片日益增长的问题,所以内核开发者们引入了新的方法,就是在内核中只保留函数,而数据则不包含,由用户(应用程序员)自己把数据按照规定的格式编写,并放在约定的地方,为了不占用过多的内存,还要求数据以根精简的方式编写。boot启动时,传参给内核,告诉内核设备树文件和kernel的位置,内核启动时根据地址去找到设备树文件,再利用专用的编译器去反编译dtb文件,将dtb还原成数据结构,以供驱动的函数去调用。firmware是三星的一个固件的设备信息,因为找不到固件,所以内核启动不成功。_exynos 4412 刷机
文章浏览阅读2w次,点赞24次,收藏42次。Linux系统配置jdkLinux学习教程,Linux入门教程(超详细)_linux配置jdk
文章浏览阅读3.3k次,点赞5次,收藏19次。xlabel('\delta');ylabel('AUC');具体符号的对照表参照下图:_matlab微米怎么输入
文章浏览阅读119次。顺序读写指的是按照文件中数据的顺序进行读取或写入。对于文本文件,可以使用fgets、fputs、fscanf、fprintf等函数进行顺序读写。在C语言中,对文件的操作通常涉及文件的打开、读写以及关闭。文件的打开使用fopen函数,而关闭则使用fclose函数。在C语言中,可以使用fread和fwrite函数进行二进制读写。 Biaoge 于2024-03-09 23:51发布 阅读量:7 ️文章类型:【 C语言程序设计 】在C语言中,用于打开文件的函数是____,用于关闭文件的函数是____。
文章浏览阅读3.4k次,点赞2次,收藏13次。跟随鼠标移动的粒子以grid(SOP)为partical(SOP)的资源模板,调整后连接【Geo组合+point spirit(MAT)】,在连接【feedback组合】适当调整。影响粒子动态的节点【metaball(SOP)+force(SOP)】添加mouse in(CHOP)鼠标位置到metaball的坐标,实现鼠标影响。..._touchdesigner怎么让一个模型跟着鼠标移动
文章浏览阅读178次。项目运行环境配置:Jdk1.8 + Tomcat7.0 + Mysql + HBuilderX(Webstorm也行)+ Eclispe(IntelliJ IDEA,Eclispe,MyEclispe,Sts都支持)。项目技术:Springboot + mybatis + Maven +mysql5.7或8.0+html+css+js等等组成,B/S模式 + Maven管理等等。环境需要1.运行环境:最好是java jdk 1.8,我们在这个平台上运行的。其他版本理论上也可以。_基于java技术的停车场管理系统实现与设计
文章浏览阅读3.5k次。前言对于MediaPlayer播放器的源码分析内容相对来说比较多,会从Java-&amp;gt;Jni-&amp;gt;C/C++慢慢分析,后面会慢慢更新。另外,博客只作为自己学习记录的一种方式,对于其他的不过多的评论。MediaPlayerDemopublic class MainActivity extends AppCompatActivity implements SurfaceHolder.Cal..._android多媒体播放源码分析 时序图
文章浏览阅读2.4k次,点赞41次,收藏13次。java 数据结构与算法 ——快速排序法_快速排序法