技术标签: redis启动错误 redis错误 redis集群 redis
在https://blog.csdn.net/zly_9117/article/details/83349778这篇博文的基础上,进行redis启动时发现了另外一个错误,错误内容如下
➜ 7000 ../redis-server redis.conf &
[1] 11045
11045:C 24 Oct 2018 19:26:52.320 # oO0OoO0OoO0Oo Redis is starting oO0OoO0OoO0Oo
11045:C 24 Oct 2018 19:26:52.320 # Redis version=999.999.999, bits=64, commit=54e8dd11, modified=0, pid=11045, just started
11045:C 24 Oct 2018 19:26:52.320 # Configuration loaded
11045:M 24 Oct 2018 19:26:52.322 * Increased maximum number of open files to 10032 (it was originally set to 7168).
11045:M 24 Oct 2018 19:26:52.323 # Unrecoverable error: corrupted cluster config file.
从字面意思理解是损坏的cluster配置,同样到源码中查找相应的错误抛出点找到如下信息
1.错误日志的输出点是下边的这段代码
fmterr:
serverLog(LL_WARNING,
"Unrecoverable error: corrupted cluster config file.");
zfree(line);
if (fp) fclose(fp);
exit(1);
}
根据源码解读发现,我们没有建立nodes.conf文件,默认此方法会返回一个C_ERR,然后由调用方clusterInit函数新建此文件并建立cluster,clusterLoadConfig函数整体代码如下。但是现在找到了此文件,并进行解读时报错,证明redis.conf配置文件中配置的内容有误。查找配置文件发现cluster-config-file参数配置错误,改成cluster-config-file nodes.conf问题解决。
/* Load the cluster config from 'filename'.
*
* If the file does not exist or is zero-length (this may happen because
* when we lock the nodes.conf file, we create a zero-length one for the
* sake of locking if it does not already exist), C_ERR is returned.
* If the configuration was loaded from the file, C_OK is returned. */
int clusterLoadConfig(char *filename) {
FILE *fp = fopen(filename,"r");
struct stat sb;
char *line;
int maxline, j;
if (fp == NULL) {
if (errno == ENOENT) {
return C_ERR;
} else {
serverLog(LL_WARNING,
"Loading the cluster node config from %s: %s",
filename, strerror(errno));
exit(1);
}
}
/* Check if the file is zero-length: if so return C_ERR to signal
* we have to write the config. */
if (fstat(fileno(fp),&sb) != -1 && sb.st_size == 0) {
fclose(fp);
return C_ERR;
}
/* Parse the file. Note that single lines of the cluster config file can
* be really long as they include all the hash slots of the node.
* This means in the worst possible case, half of the Redis slots will be
* present in a single line, possibly in importing or migrating state, so
* together with the node ID of the sender/receiver.
*
* To simplify we allocate 1024+CLUSTER_SLOTS*128 bytes per line. */
maxline = 1024+CLUSTER_SLOTS*128;
line = zmalloc(maxline);
while(fgets(line,maxline,fp) != NULL) {
int argc;
sds *argv;
clusterNode *n, *master;
char *p, *s;
/* Skip blank lines, they can be created either by users manually
* editing nodes.conf or by the config writing process if stopped
* before the truncate() call. */
if (line[0] == '\n' || line[0] == '\0') continue;
/* Split the line into arguments for processing. */
argv = sdssplitargs(line,&argc);
if (argv == NULL) goto fmterr;
/* Handle the special "vars" line. Don't pretend it is the last
* line even if it actually is when generated by Redis. */
if (strcasecmp(argv[0],"vars") == 0) {
for (j = 1; j < argc; j += 2) {
if (strcasecmp(argv[j],"currentEpoch") == 0) {
server.cluster->currentEpoch =
strtoull(argv[j+1],NULL,10);
} else if (strcasecmp(argv[j],"lastVoteEpoch") == 0) {
server.cluster->lastVoteEpoch =
strtoull(argv[j+1],NULL,10);
} else {
serverLog(LL_WARNING,
"Skipping unknown cluster config variable '%s'",
argv[j]);
}
}
sdsfreesplitres(argv,argc);
continue;
}
/* Regular config lines have at least eight fields */
if (argc < 8) goto fmterr;
/* Create this node if it does not exist */
n = clusterLookupNode(argv[0]);
if (!n) {
n = createClusterNode(argv[0],0);
clusterAddNode(n);
}
/* Address and port */
if ((p = strrchr(argv[1],':')) == NULL) goto fmterr;
*p = '\0';
memcpy(n->ip,argv[1],strlen(argv[1])+1);
char *port = p+1;
char *busp = strchr(port,'@');
if (busp) {
*busp = '\0';
busp++;
}
n->port = atoi(port);
/* In older versions of nodes.conf the "@busport" part is missing.
* In this case we set it to the default offset of 10000 from the
* base port. */
n->cport = busp ? atoi(busp) : n->port + CLUSTER_PORT_INCR;
/* Parse flags */
p = s = argv[2];
while(p) {
p = strchr(s,',');
if (p) *p = '\0';
if (!strcasecmp(s,"myself")) {
serverAssert(server.cluster->myself == NULL);
myself = server.cluster->myself = n;
n->flags |= CLUSTER_NODE_MYSELF;
} else if (!strcasecmp(s,"master")) {
n->flags |= CLUSTER_NODE_MASTER;
} else if (!strcasecmp(s,"slave")) {
n->flags |= CLUSTER_NODE_SLAVE;
} else if (!strcasecmp(s,"fail?")) {
n->flags |= CLUSTER_NODE_PFAIL;
} else if (!strcasecmp(s,"fail")) {
n->flags |= CLUSTER_NODE_FAIL;
n->fail_time = mstime();
} else if (!strcasecmp(s,"handshake")) {
n->flags |= CLUSTER_NODE_HANDSHAKE;
} else if (!strcasecmp(s,"noaddr")) {
n->flags |= CLUSTER_NODE_NOADDR;
} else if (!strcasecmp(s,"nofailover")) {
n->flags |= CLUSTER_NODE_NOFAILOVER;
} else if (!strcasecmp(s,"noflags")) {
/* nothing to do */
} else {
serverPanic("Unknown flag in redis cluster config file");
}
if (p) s = p+1;
}
/* Get master if any. Set the master and populate master's
* slave list. */
if (argv[3][0] != '-') {
master = clusterLookupNode(argv[3]);
if (!master) {
master = createClusterNode(argv[3],0);
clusterAddNode(master);
}
n->slaveof = master;
clusterNodeAddSlave(master,n);
}
/* Set ping sent / pong received timestamps */
if (atoi(argv[4])) n->ping_sent = mstime();
if (atoi(argv[5])) n->pong_received = mstime();
/* Set configEpoch for this node. */
n->configEpoch = strtoull(argv[6],NULL,10);
/* Populate hash slots served by this instance. */
for (j = 8; j < argc; j++) {
int start, stop;
if (argv[j][0] == '[') {
/* Here we handle migrating / importing slots */
int slot;
char direction;
clusterNode *cn;
p = strchr(argv[j],'-');
serverAssert(p != NULL);
*p = '\0';
direction = p[1]; /* Either '>' or '<' */
slot = atoi(argv[j]+1);
if (slot < 0 || slot >= CLUSTER_SLOTS) goto fmterr;
p += 3;
cn = clusterLookupNode(p);
if (!cn) {
cn = createClusterNode(p,0);
clusterAddNode(cn);
}
if (direction == '>') {
server.cluster->migrating_slots_to[slot] = cn;
} else {
server.cluster->importing_slots_from[slot] = cn;
}
continue;
} else if ((p = strchr(argv[j],'-')) != NULL) {
*p = '\0';
start = atoi(argv[j]);
stop = atoi(p+1);
} else {
start = stop = atoi(argv[j]);
}
if (start < 0 || start >= CLUSTER_SLOTS) goto fmterr;
if (stop < 0 || stop >= CLUSTER_SLOTS) goto fmterr;
while(start <= stop) clusterAddSlot(n, start++);
}
sdsfreesplitres(argv,argc);
}
/* Config sanity check */
if (server.cluster->myself == NULL) goto fmterr;
zfree(line);
fclose(fp);
serverLog(LL_NOTICE,"Node configuration loaded, I'm %.40s", myself->name);
/* Something that should never happen: currentEpoch smaller than
* the max epoch found in the nodes configuration. However we handle this
* as some form of protection against manual editing of critical files. */
if (clusterGetMaxEpoch() > server.cluster->currentEpoch) {
server.cluster->currentEpoch = clusterGetMaxEpoch();
}
return C_OK;
fmterr:
serverLog(LL_WARNING,
"Unrecoverable error: corrupted cluster config file.");
zfree(line);
if (fp) fclose(fp);
exit(1);
}
文章浏览阅读1.1k次。一、选择题1. 串行接口是指( )。A. 接口与系统总线之间串行传送,接口与I/0设备之间串行传送B. 接口与系统总线之间串行传送,接口与1/0设备之间并行传送C. 接口与系统总线之间并行传送,接口与I/0设备之间串行传送D. 接口与系统总线之间并行传送,接口与I/0设备之间并行传送【答案】C2. 最容易造成很多小碎片的可变分区分配算法是( )。A. 首次适应算法B. 最佳适应算法..._874 计算机科学专业基础综合题型
文章浏览阅读9.7k次,点赞5次,收藏15次。连接xshell失败,报错如下图,怎么解决呢。1、通过ps -e|grep ssh命令判断是否安装ssh服务2、如果只有客户端安装了,服务器没有安装,则需要安装ssh服务器,命令:apt-get install openssh-server3、安装成功之后,启动ssh服务,命令:/etc/init.d/ssh start4、通过ps -e|grep ssh命令再次判断是否正确启动..._could not connect to '192.168.17.128' (port 22): connection failed.
文章浏览阅读209次。00000000_杰理 空白芯片 烧入key文件
文章浏览阅读475次。2023年初,“ChatGPT”一词在社交媒体上引起了热议,人们纷纷探讨它的本质和对社会的影响。就连央视新闻也对此进行了报道。作为新传专业的前沿人士,我们当然不能忽视这一热点。本文将全面解析ChatGPT,打开“技术黑箱”,探讨它对新闻与传播领域的影响。_引发对chatgpt兴趣的表述
文章浏览阅读259次。用Python数据分析方法进行汉字声调频率统计分析木合塔尔·沙地克;布合力齐姑丽·瓦斯力【期刊名称】《电脑知识与技术》【年(卷),期】2017(013)035【摘要】该文首先用Python程序,自动获取基本汉字字符集中的所有汉字,然后用汉字拼音转换工具pypinyin把所有汉字转换成拼音,最后根据所有汉字的拼音声调,统计并可视化拼音声调的占比.【总页数】2页(13-14)【关键词】数据分析;数据可..._汉字声调频率统计
文章浏览阅读64次。最近在做一个android系统移植的项目,所使用的开发板com1是调试串口,就是说会有uboot和kernel的调试信息打印在com1上(ttySAC0)。因为后期要使用ttySAC0作为上层应用通信串口,所以要把所有的调试信息都给去掉。参考网上的几篇文章,自己做了如下修改,终于把调试信息重定向到ttySAC1上了,在这做下记录。参考文章有:http://blog.csdn.net/longt..._嵌入式rootfs 输出重定向到/dev/console
文章浏览阅读1.2k次,点赞4次,收藏12次。1,先去iconfont登录,然后选择图标加入购物车 2,点击又上角车车添加进入项目我的项目中就会出现选择的图标 3,点击下载至本地,然后解压文件夹,然后切换到uniapp打开终端运行注:要保证自己电脑有安装node(没有安装node可以去官网下载Node.js 中文网)npm i -g iconfont-tools(mac用户失败的话在前面加个sudo,password就是自己的开机密码吧)4,终端切换到上面解压的文件夹里面,运行iconfont-tools 这些可以默认也可以自己命名(我是自己命名的_uniapp symbol图标
文章浏览阅读1.2w次,点赞25次,收藏192次。char*和char[]都是指针,指向第一个字符所在的地址,但char*是常量的指针,char[]是指针的常量_c++ char*
文章浏览阅读930次。代码编辑器或者文本编辑器,对于程序员来说,就像剑与战士一样,谁都想拥有一把可以随心驾驭且锋利无比的宝剑,而每一位程序员,同样会去追求最适合自己的强大、灵活的编辑器,相信你和我一样,都不会例外。我用过的编辑器不少,真不少~ 但却没有哪款让我特别心仪的,直到我遇到了 Sublime Text 2 !如果说“神器”是我能给予一款软件最高的评价,那么我很乐意为它封上这么一个称号。它小巧绿色且速度非
文章浏览阅读4.1k次。一、选择法这是每一个数出来跟后面所有的进行比较。2.冒泡排序法,是两个相邻的进行对比。_对十个数进行大小排序java
文章浏览阅读2.9k次。物联网开发笔记——使用网络调试助手连接阿里云物联网平台(基于MQTT协议)其实作者本意是使用4G模块来实现与阿里云物联网平台的连接过程,但是由于自己用的4G模块自身的限制,使得阿里云连接总是无法建立,已经联系客服返厂检修了,于是我在此使用网络调试助手来演示如何与阿里云物联网平台建立连接。一.准备工作1.MQTT协议说明文档(3.1.1版本)2.网络调试助手(可使用域名与服务器建立连接)PS:与阿里云建立连解释,最好使用域名来完成连接过程,而不是使用IP号。这里我跟阿里云的售后工程师咨询过,表示对应_网络调试助手连接阿里云连不上
文章浏览阅读544次,点赞5次,收藏6次。运算符与表达式任何高级程序设计语言中,表达式都是最基本的组成部分,可以说C++中的大部分语句都是由表达式构成的。_无c语言基础c++期末速成