技术标签: 【Linux内核】
目录
cma,全称(contiguous memory allocation),在内存初始化时预留一块连续内存,可以在内存碎片化严重时通过调用dma_alloc_contiguous接口并且gfp指定为__GFP_DIRECT_RECLAIM从预留的那块连续内存中分配大块连续内存。
Contiguous Memory Allocator, CMA
,连续内存分配器,用于分配连续的大块内存。
连续内存分配器(CMA)是一个框架,它允许为物理连续内存管理设置特定于计算机的配置。然后根据该配置分配设备的内存。该框架的主要作用不是分配内存,而是解析和管理内存配置,并充当设备驱动程序和可插拔分配器之间的中介。因此,它不依赖于任何内存分配方法或策略。
嵌入式系统上的各种设备不支持散点图和/或IO映射,因此需要连续的内存块才能运行。它们包括相机,硬件视频解码器和编码器等设备。此类设备通常需要大的内存缓冲区(例如,全高清帧的大小大于2兆像素,即,内存大小超过6 MB),这使得kmalloc()之类的机制无效。一些嵌入式设备对缓冲区提出了额外的要求,例如,它们只能在分配给特定位置/内存库(如果系统具有多个内存库)的缓冲区或与特定内存边界对齐的缓冲区上运行。嵌入式设备的开发最近出现了很大的增长(尤其是在V4L领域),许多这样的驱动程序都包含了自己的内存分配代码。他们中的大多数使用基于bootmem的方法。
CMA分配器
,会Reserve一片物理内存区域:
此外,CMA分配器
还可以与DMA子系统
集成在一起,使用DMA的设备驱动程序无需使用单独的CMA API
。
《搞懂Linux零拷贝,DMA》https://rtoax.blog.csdn.net/article/details/108825666
《ARM SMMU原理与IOMMU技术(“VT-d” DMA、I/O虚拟化、内存虚拟化)》
大多数i.MX SoC都没有针对特定IP的IOMMU,后者需要较大的连续内存来进行操作,例如VPU / GPU / ISI / CSI。或者他们有IOMMU,但是性能却不怎么样。在默认的i.MX BSP中,我们仍然为那些IP驱动程序分配物理连续内存,以进行DMA传输。
在arm64内核中,DMA分配API将以各种方式分配内存,具体取决于设备配置(在dts或gfp标志中)。下表显示了DMA分配API(不带IOMMU的设备)如何工作以找到正确的页面方式(按顺序,连贯池-> CMA->好友-> SWIOTLB):
Allocator (by order) | Configurations (w/o IOMMU) | Comments | Mapping |
---|---|---|---|
Coherent Pool |
|
By __alloc_from_pool() | Already mapped on boot when coherent pool init in VMALLOC |
CMA |
|
By cma_alloc() | map_vm_area, mapped in VMALLOC |
Buddy |
|
By __get_free_pages(), which can only allocate from the DMA/normal zone (lowmem), 32bits address spaces | Already mapped in the lowmem area by kernel on boot |
SWIOTLB |
|
By map_single() | Already mapped on boot when SWIOTLB init |
翻译一下:
分配者(按订单) | 配置(不带IOMMU) | 注释评论 | 映射 |
---|---|---|---|
相干池Coherent Pool |
|
通过__alloc_from_pool() | 在VMALLOC中进行相关池初始化时已在启动时映射 |
CMA |
|
通过cma_alloc() | map_vm_area,在VMALLOC中映射 |
伙伴Buddy |
|
通过只能从DMA /正常区域(lowmem)分配的__get_free_pages(),可以使用32位地址空间 | 引导时已经由内核映射到lowmem区域 |
SWIOTLB |
|
由map_single() | SWIOTLB初始化时已在启动时映射 |
还显示了它的工作原理(DMA分配路径):
默认情况下,在大多数情况下,内核使用CMA作为DMA缓冲区分配的后端。这就是为什么i.MX BSP在默认版本中将CMA用于GPU / VPU / CSI / ISI或其他用于DMA传输的缓冲区的原因。
https://rtoax.blog.csdn.net/article/details/109558498
内核定义了struct cma
结构,用于管理一个CMA区域
,此外还定义了全局的cma数组
,如下:
struct cma {
unsigned long base_pfn;
unsigned long count;
unsigned long *bitmap;
unsigned int order_per_bit; /* Order of pages represented by one bit */
struct mutex lock;
#ifdef CONFIG_CMA_DEBUGFS
struct hlist_head mem_head;
spinlock_t mem_head_lock;
#endif
const char *name;
};
extern struct cma cma_areas[MAX_CMA_AREAS];
extern unsigned cma_area_count;
base_pfn
:CMA区域物理地址的起始页帧号;count
:CMA区域总体的页数;*bitmap
:位图,用于描述页的分配情况;order_per_bit
:位图中每个bit
描述的物理页面的order
值,其中页面数为2^order
值;来一张图就会清晰明了:
之前的文章也都分析过,物理内存的描述放置在dts
中,最终会在系统启动过程中,对dtb
文件进行解析,从而完成内存信息注册。
CMA
的内存在dts
中的描述示例如下图:
在dtb
解析过程中,会调用到rmem_cma_setup
函数:
RESERVEDMEM_OF_DECLARE(cma, "shared-dma-pool", rmem_cma_setup);
可以通过内核参数或配置宏,来进行CMA区域的创建,最终会调用到cma_declare_contiguous
函数,如下图:
在创建完CMA区域
后,该内存区域成了保留区域,如果单纯给驱动使用,显然会造成内存的浪费,因此内存管理模块会将CMA区域
添加到Buddy System
中,用于可移动页面的分配和管理。CMA区域
是通过cma_init_reserved_areas
接口来添加到Buddy System
中的。
core_initcall(cma_init_reserved_areas);
core_initcall
宏将cma_init_reserved_areas
函数放置到特定的段中,在系统启动的时候会调用到该函数。
CMA分配,入口函数为cma_alloc
:
CMA释放,入口函数为cma_release
:函数比较简单,直接贴上代码
/**
* cma_release() - release allocated pages
* @cma: Contiguous memory region for which the allocation is performed.
* @pages: Allocated pages.
* @count: Number of allocated pages.
*
* This function releases memory allocated by alloc_cma().
* It returns false when provided pages do not belong to contiguous area and
* true otherwise.
*/
bool cma_release(struct cma *cma, const struct page *pages, unsigned int count)
{
unsigned long pfn;
if (!cma || !pages)
return false;
pr_debug("%s(page %p)\n", __func__, (void *)pages);
pfn = page_to_pfn(pages);
if (pfn < cma->base_pfn || pfn >= cma->base_pfn + cma->count)
return false;
VM_BUG_ON(pfn + count > cma->base_pfn + cma->count);
free_contig_range(pfn, count);
cma_clear_bitmap(cma, pfn, count);
trace_cma_release(pfn, pages, count);
return true;
}
代码参考driver/base/dma-contiguous.c
,主要包括的接口有:
/**
* dma_alloc_from_contiguous() - allocate pages from contiguous area
* @dev: Pointer to device for which the allocation is performed.
* @count: Requested number of pages.
* @align: Requested alignment of pages (in PAGE_SIZE order).
* @gfp_mask: GFP flags to use for this allocation.
*
* This function allocates memory buffer for specified device. It uses
* device specific contiguous memory area if available or the default
* global one. Requires architecture specific dev_get_cma_area() helper
* function.
*/
struct page *dma_alloc_from_contiguous(struct device *dev, size_t count,
unsigned int align, gfp_t gfp_mask);
/**
* dma_release_from_contiguous() - release allocated pages
* @dev: Pointer to device for which the pages were allocated.
* @pages: Allocated pages.
* @count: Number of allocated pages.
*
* This function releases memory allocated by dma_alloc_from_contiguous().
* It returns false when provided pages do not belong to contiguous area and
* true otherwise.
*/
bool dma_release_from_contiguous(struct device *dev, struct page *pages,
int count);
在上述的接口中,实际调用的就是cma_alloc/cma_release
接口来实现的。
整体来看,CMA分配器还是比较简单易懂,也不再深入分析。
上面的RED Cons声明。关键是为关键的分配路径(例如GPU图形缓冲区和摄像机/ VPU预览/记录缓冲区)保留内存,以防止分配失败而导致良好的用户体验,分配失败会导致黑屏,预览卡死等。 CMA和FUSE一起工作。
要摆脱CMA,基本思想是在DMA分配中切断CMA方式,转向相干池(原子池)。请注意,连贯池只能由DMA分配API使用,它不会与系统伙伴共享。
在命令行中添加“ coherent_pool = <size>”,Coherent池实际上是从系统默认CMA分配的,因此CMA size> coherent_pool。
此大小没有参考,因为从系统到系统以及用例到用例各有不同:
必须通过测试验证大小,以确保系统稳定。
修改至arch / arm64 / mm / dma-mapping.c,在__dma_alloc()函数中删除gfpflags_allow_blocking检查:
diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c
index 7015d3e..ef30b46 100644
--- a/arch/arm64/mm/dma-mapping.c
+++ b/arch/arm64/mm/dma-mapping.c
@@ -147,7 +147,7 @@ static void *__dma_alloc(struct device *dev, size_t size,
size = PAGE_ALIGN(size);
- if (!coherent && !gfpflags_allow_blocking(flags)) {
+ if (!coherent) { // && !gfpflags_allow_blocking(flags)) {
struct page *page = NULL;
void *addr = __alloc_from_pool(size, &page, flags);
在Android和Yocto版本中,ION分配器(Android临时驱动程序)都用于VPU缓冲区。它默认进入ION CMA堆。这意味着ION对连续内存的请求直接发送给CMA。为了避免CMA,我们可以在ION中使用分割堆栈而不是CMA堆栈:
5.1.3.1安卓
启用CARVEOUT堆,禁用CMA堆:
CONFIG_ION = y
CONFIG_ION_SYSTEM_HEAP = y
-CONFIG_ION_CMA_HEAP = y
+ CONFIG_ION_CARVEOUT_HEAP = y
+ CONFIG_ION_CMA_HEAP = n
在dts中调整分割保留的堆基地址和大小:
/ {
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
carveout_region: imx_ion@0 {
compatible = "imx-ion-pool";
reg = <0x0 0xf8000000 0 0x8000000>;
};
};
};
5.1.3.2 Linux
yocto / build-8qm / tmp / work / aarch64-mx8-poky-linux / gstreamer1.0-plugins-base / 1.14.4.imx-r0 / git:
diff --git a/gst-libs/gst/allocators/gstionmemory.c b/gst-libs/gst/allocators/gstionmemory.c
index 1218c4a..12e403d 100644
--- a/gst-libs/gst/allocators/gstionmemory.c
+++ b/gst-libs/gst/allocators/gstionmemory.c
@@ -227,7 +227,8 @@ gst_ion_alloc_alloc (GstAllocator * allocator, gsize size,
}
for (gint i=0; i<heapCnt; i++) {
- if (ihd[i].type == ION_HEAP_TYPE_DMA) {
+ if (ihd[i].type == ION_HEAP_TYPE_DMA ||
+ ihd[i].type == ION_HEAP_TYPE_CARVEOUT) {
heap_mask |= 1 << ihd[i].heap_id;
}
}
https://lwn.net/Articles/396707/
* Contiguous Memory Allocator
The Contiguous Memory Allocator (CMA) is a framework, which allows
setting up a machine-specific configuration for physically-contiguous
memory management. Memory for devices is then allocated according
to that configuration.
The main role of the framework is not to allocate memory, but to
parse and manage memory configurations, as well as to act as an
in-between between device drivers and pluggable allocators. It is
thus not tied to any memory allocation method or strategy.
** Why is it needed?
Various devices on embedded systems have no scatter-getter and/or
IO map support and as such require contiguous blocks of memory to
operate. They include devices such as cameras, hardware video
decoders and encoders, etc.
Such devices often require big memory buffers (a full HD frame is,
for instance, more then 2 mega pixels large, i.e. more than 6 MB
of memory), which makes mechanisms such as kmalloc() ineffective.
Some embedded devices impose additional requirements on the
buffers, e.g. they can operate only on buffers allocated in
particular location/memory bank (if system has more than one
memory bank) or buffers aligned to a particular memory boundary.
Development of embedded devices have seen a big rise recently
(especially in the V4L area) and many such drivers include their
own memory allocation code. Most of them use bootmem-based methods.
CMA framework is an attempt to unify contiguous memory allocation
mechanisms and provide a simple API for device drivers, while
staying as customisable and modular as possible.
** Design
The main design goal for the CMA was to provide a customisable and
modular framework, which could be configured to suit the needs of
individual systems. Configuration specifies a list of memory
regions, which then are assigned to devices. Memory regions can
be shared among many device drivers or assigned exclusively to
one. This has been achieved in the following ways:
1. The core of the CMA does not handle allocation of memory and
management of free space. Dedicated allocators are used for
that purpose.
This way, if the provided solution does not match demands
imposed on a given system, one can develop a new algorithm and
easily plug it into the CMA framework.
The presented solution includes an implementation of a best-fit
algorithm.
2. CMA allows a run-time configuration of the memory regions it
will use to allocate chunks of memory from. The set of memory
regions is given on command line so it can be easily changed
without the need for recompiling the kernel.
Each region has it's own size, alignment demand, a start
address (physical address where it should be placed) and an
allocator algorithm assigned to the region.
This means that there can be different algorithms running at
the same time, if different devices on the platform have
distinct memory usage characteristics and different algorithm
match those the best way.
3. When requesting memory, devices have to introduce themselves.
This way CMA knows who the memory is allocated for. This
allows for the system architect to specify which memory regions
each device should use.
3a. Devices can also specify a "kind" of memory they want.
This makes it possible to configure the system in such
a way, that a single device may get memory from different
memory regions, depending on the "kind" of memory it
requested. For example, a video codec driver might want to
allocate some shared buffers from the first memory bank and
the other from the second to get the highest possible
memory throughput.
** Use cases
Lets analyse some imaginary system that uses the CMA to see how
the framework can be used and configured.
We have a platform with a hardware video decoder and a camera each
needing 20 MiB of memory in worst case. Our system is written in
such a way though that the two devices are never used at the same
time and memory for them may be shared. In such a system the
following two command line arguments would be used:
cma=r=20M cma_map=video,camera=r
The first instructs CMA to allocate a region of 20 MiB and use the
first available memory allocator on it. The second, that drivers
named "video" and "camera" are to be granted memory from the
previously defined region.
We can see, that because the devices share the same region of
memory, we save 20 MiB of memory, compared to the situation when
each of the devices would reserve 20 MiB of memory for itself.
However, after some development of the system, it can now run
video decoder and camera at the same time. The 20 MiB region is
no longer enough for the two to share. A quick fix can be made to
grant each of those devices separate regions:
cma=v=20M,c=20M cma_map=video=v;camera=c
This solution also shows how with CMA you can assign private pools
of memory to each device if that is required.
Allocation mechanisms can be replaced dynamically in a similar
manner as well. Let's say that during testing, it has been
discovered that, for a given shared region of 40 MiB,
fragmentation has become a problem. It has been observed that,
after some time, it becomes impossible to allocate buffers of the
required sizes. So to satisfy our requirements, we would have to
reserve a larger shared region beforehand.
But fortunately, you have also managed to develop a new allocation
algorithm -- Neat Allocation Algorithm or "na" for short -- which
satisfies the needs for both devices even on a 30 MiB region. The
configuration can be then quickly changed to:
cma=r=30M:na cma_map=video,camera=r
This shows how you can develop your own allocation algorithms if
the ones provided with CMA do not suit your needs and easily
replace them, without the need to modify CMA core or even
recompiling the kernel.
** Technical Details
*** The command line parameters
As shown above, CMA is configured from command line via two
arguments: "cma" and "cma_map". The first one specifies regions
that are to be reserved for CMA. The second one specifies what
regions each device is assigned to.
The format of the "cma" parameter is as follows:
cma ::= "cma=" regions [ ';' ]
regions ::= region [ ';' regions ]
region ::= reg-name
'=' size
[ '@' start ]
[ '/' alignment ]
[ ':' [ alloc-name ] [ '(' alloc-params ')' ] ]
reg-name ::= a sequence of letters and digits
// name of the region
size ::= memsize // size of the region
start ::= memsize // desired start address of
// the region
alignment ::= memsize // alignment of the start
// address of the region
alloc-name ::= a non-empty sequence of letters and digits
// name of an allocator that will be used
// with the region
alloc-params ::= a sequence of chars other then ')' and ';'
// optional parameters for the allocator
memsize ::= whatever memparse() accepts
The format of the "cma_map" parameter is as follows:
cma-map ::= "cma_map=" rules [ ';' ]
rules ::= rule [ ';' rules ]
rule ::= patterns '=' regions
patterns ::= pattern [ ',' patterns ]
regions ::= reg-name [ ',' regions ]
// list of regions to try to allocate memory
// from for devices that match pattern
pattern ::= dev-pattern [ '/' kind-pattern ]
| '/' kind-pattern
// pattern request must match for this rule to
// apply to it; the first rule that matches is
// applied; if dev-pattern part is omitted
// value identical to the one used in previous
// pattern is assumed
dev-pattern ::= pattern-str
// pattern that device name must match for the
// rule to apply.
kind-pattern ::= pattern-str
// pattern that "kind" of memory (provided by
// device) must match for the rule to apply.
pattern-str ::= a non-empty sequence of characters with '?'
meaning any character and possible '*' at
the end meaning to match the rest of the
string
Some examples (whitespace added for better readability):
cma = r1 = 64M // 64M region
@512M // starting at address 512M
// (or at least as near as possible)
/1M // make sure it's aligned to 1M
:foo(bar); // uses allocator "foo" with "bar"
// as parameters for it
r2 = 64M // 64M region
/1M; // make sure it's aligned to 1M
// uses the first available allocator
r3 = 64M // 64M region
@512M // starting at address 512M
:foo; // uses allocator "foo" with no parameters
cma_map = foo = r1;
// device foo with kind==NULL uses region r1
foo/quaz = r2; // OR:
/quaz = r2;
// device foo with kind == "quaz" uses region r2
foo/* = r3; // OR:
/* = r3;
// device foo with any other kind uses region r3
bar/* = r1,r2;
// device bar with any kind uses region r1 or r2
baz?/a* , baz?/b* = r3;
// devices named baz? where ? is any character
// with kind being a string starting with "a" or
// "b" use r3
*** The device and kind of memory
The name of the device is taken form the device structure. It is
not possible to use CMA if driver does not register a device
(actually this can be overcome if a fake device structure is
provided with at least the name set).
The kind of memory is an optional argument provided by the device
whenever it requests memory chunk. In many cases this can be
ignored but sometimes it may be required for some devices.
For instance, let say that there are two memory banks and for
performance reasons a device uses buffers in both of them. In
such case, the device driver would define two kinds and use it for
different buffers. Command line arguments could look as follows:
cma=a=32M@0,b=32M@512M cma_map=foo/a=a;foo/b=b
And whenever the driver allocated the memory it would specify the
kind of memory:
buffer1 = cma_alloc(dev, 1 << 20, 0, "a");
buffer2 = cma_alloc(dev, 1 << 20, 0, "b");
If it was needed to try to allocate from the other bank as well if
the dedicated one is full command line arguments could be changed
to:
cma=a=32M@0,b=32M@512M cma_map=foo/a=a,b;foo/b=b,a
On the other hand, if the same driver was used on a system with
only one bank, the command line could be changed to:
cma=r=64M cma_map=foo/*=r
without the need to change the driver at all.
*** API
There are four calls provided by the CMA framework to devices. To
allocate a chunk of memory cma_alloc() function needs to be used:
unsigned long cma_alloc(const struct device *dev,
const char *kind,
unsigned long size,
unsigned long alignment);
If required, device may specify alignment that the chunk need to
satisfy. It have to be a power of two or zero. The chunks are
always aligned at least to a page.
The kind specifies the kind of memory as described to in the
previous subsection. If device driver does not use notion of
memory kinds it's safe to pass NULL as the kind.
The basic usage of the function is just a:
addr = cma_alloc(dev, NULL, size, 0);
The function returns physical address of allocated chunk or
a value that evaluated true if checked with IS_ERR_VALUE(), so the
correct way for checking for errors is:
unsigned long addr = cma_alloc(dev, size);
if (IS_ERR_VALUE(addr))
return (int)addr;
/* Allocated */
(Make sure to include <linux/err.h> which contains the definition
of the IS_ERR_VALUE() macro.)
Allocated chunk is freed via a cma_put() function:
int cma_put(unsigned long addr);
It takes physical address of the chunk as an argument and
decreases it's reference counter. If the counter reaches zero the
chunk is freed. Most of the time users do not need to think about
reference counter and simply use the cma_put() as a free call.
If one, however, were to share a chunk with others built in
reference counter may turn out to be handy. To increment it, one
needs to use cma_get() function:
int cma_put(unsigned long addr);
The last function is the cma_info() which returns information
about regions assigned to given (dev, kind) pair. Its syntax is:
int cma_info(struct cma_info *info,
const struct device *dev,
const char *kind);
On successful exit it fills the info structure with lower and
upper bound of regions, total size and number of regions assigned
to given (dev, kind) pair.
*** Allocator operations
Creating an allocator for CMA needs four functions to be
implemented.
The first two are used to initialise an allocator far given driver
and clean up afterwards:
int cma_foo_init(struct cma_region *reg);
void cma_foo_done(struct cma_region *reg);
The first is called during platform initialisation. The
cma_region structure has saved starting address of the region as
well as its size. It has also alloc_params field with optional
parameters passed via command line (allocator is free to interpret
those in any way it pleases). Any data that allocate associated
with the region can be saved in private_data field.
The second call cleans up and frees all resources the allocator
has allocated for the region. The function can assume that all
chunks allocated form this region have been freed thus the whole
region is free.
The two other calls are used for allocating and freeing chunks.
They are:
struct cma_chunk *cma_foo_alloc(struct cma_region *reg,
unsigned long size,
unsigned long alignment);
void cma_foo_free(struct cma_chunk *chunk);
As names imply the first allocates a chunk and the other frees
a chunk of memory. It also manages a cma_chunk object
representing the chunk in physical memory.
Either of those function can assume that they are the only thread
accessing the region. Therefore, allocator does not need to worry
about concurrency.
When allocator is ready, all that is left is register it by adding
a line to "mm/cma-allocators.h" file:
CMA_ALLOCATOR("foo", foo)
The first "foo" is a named that will be available to use with
command line argument. The second is the part used in function
names.
*** Integration with platform
There is one function that needs to be called form platform
initialisation code. That is the cma_regions_allocate() function:
void cma_regions_allocate(int (*alloc)(struct cma_region *reg));
It traverses list of all of the regions given on command line and
reserves memory for them. The only argument is a callback
function used to reserve the region. Passing NULL as the argument
makes the function use cma_region_alloc() function which uses
bootmem for allocating.
Alternatively, platform code could traverse the cma_regions array
by itself but this should not be necessary.
The If cma_region_alloc() allocator is used, the
cma_regions_allocate() function needs to be allocated when bootmem
is active.
Platform has also a way of providing default cma and cma_map
parameters. cma_defaults() function is used for that purpose:
int cma_defaults(const char *cma, const char *cma_map)
It needs to be called after early params have been parsed but
prior to allocating regions. Arguments of this function are used
only if they are not-NULL and respective command line argument was
not provided.
** Future work
In the future, implementation of mechanisms that would allow the
free space inside the regions to be used as page cache, filesystem
buffers or swap devices is planned. With such mechanisms, the
memory would not be wasted when not used.
Because all allocations and freeing of chunks pass the CMA
framework it can follow what parts of the reserved memory are
freed and what parts are allocated. Tracking the unused memory
would let CMA use it for other purposes such as page cache, I/O
buffers, swap, etc.
内存管理的分析先告一段落,后续可能还会针对某些模块进一步的研究与完善。
内存管理子系统,极其复杂,盘根错节,很容易就懵圈了,尽管费了不少心力,也只能说略知皮毛。
学习就像是爬山,面对一座高山,可能会有心理障碍,但是当你跨越之后,再看到同样高的山,心理上你将不再畏惧。
接下来将研究进程管理子系统
,将任督二脉打通。
未来会持续分析内核中的各类框架,并发机制等,敬请关注,一起探讨。
https://www.cnblogs.com/LoyenWang/p/12182594.html
《搞懂Linux零拷贝,DMA》https://rtoax.blog.csdn.net/article/details/108825666
《ARM SMMU原理与IOMMU技术(“VT-d” DMA、I/O虚拟化、内存虚拟化)》
《直接内存访问 (Direct Memory Access, DMA)》
《[Linux Device Drivers, 2nd Edition] mmap和DMA》
《arm64/hugetlb: Reserve CMA areas for gigantic pages on 16K and 64K configs》
《“ CMA文档”》
《如何摆脱CMA》
文章浏览阅读331次。第一部分:准备工作1 安装虚拟机2 安装centos73 安装JDK以上三步是准备工作,至此已经完成一台已安装JDK的主机第二部分:准备3台虚拟机以下所有工作最好都在root权限下操作1 克隆上面已经有一台虚拟机了,现在对master进行克隆,克隆出另外2台子机;1.1 进行克隆21.2 下一步1.3 下一步1.4 下一步1.5 根据子机需要,命名和安装路径1.6 ..._创建一个hadoop项目
文章浏览阅读1.7k次。心脏滴血漏洞HeartBleed CVE-2014-0160 是由heartbeat功能引入的,本文从深入码层面的分析该漏洞产生的原因_heartbleed代码分析
文章浏览阅读1.4k次。前言ofd是国家文档标准,其对标的文档格式是pdf。ofd文档是容器格式文件,ofd其实就是压缩包。将ofd文件后缀改为.zip,解压后可看到文件包含的内容。ofd文件分析工具下载:点我下载。ofd文件解压后,可以看到如下内容: 对于xml文件,可以用文本工具查看。但是对于印章文件(Seal.esl)、签名文件(SignedValue.dat)就无法查看其内容了。本人开发一款ofd内容查看器,..._signedvalue.dat
文章浏览阅读1.8w次,点赞29次,收藏313次。整体系统设计本设计主要是对ADC和DAC的使用,主要实现功能流程为:首先通过串口向FPGA发送控制信号,控制DAC芯片tlv5618进行DA装换,转换的数据存在ROM中,转换开始时读取ROM中数据进行读取转换。其次用按键控制adc128s052进行模数转换100次,模数转换数据存储到FIFO中,再从FIFO中读取数据通过串口输出显示在pc上。其整体系统框图如下:图1:FPGA数据采集系统框图从图中可以看出,该系统主要包括9个模块:串口接收模块、按键消抖模块、按键控制模块、ROM模块、D.._基于fpga的信息采集
文章浏览阅读2.5w次。1.背景错误信息:-- [http-nio-9904-exec-5] o.s.c.n.z.filters.post.SendErrorFilter : Error during filteringcom.netflix.zuul.exception.ZuulException: Forwarding error at org.springframework.cloud..._com.netflix.zuul.exception.zuulexception
文章浏览阅读358次。1.介绍图的相关概念 图是由顶点的有穷非空集和一个描述顶点之间关系-边(或者弧)的集合组成。通常,图中的数据元素被称为顶点,顶点间的关系用边表示,图通常用字母G表示,图的顶点通常用字母V表示,所以图可以定义为: G=(V,E)其中,V(G)是图中顶点的有穷非空集合,E(G)是V(G)中顶点的边的有穷集合1.1 无向图:图中任意两个顶点构成的边是没有方向的1.2 有向图:图中..._给定一个邻接矩阵未必能够造出一个图
文章浏览阅读321次。(十二)、WDS服务器安装通过前面的测试我们会发现,每次安装的时候需要加域光盘映像,这是一个比较麻烦的事情,试想一个上万个的公司,你天天带着一个光盘与光驱去给别人装系统,这将是一个多么痛苦的事情啊,有什么方法可以解决这个问题了?答案是肯定的,下面我们就来简单说一下。WDS服务器,它是Windows自带的一个免费的基于系统本身角色的一个功能,它主要提供一种简单、安全的通过网络快速、远程将Window..._doc server2012上通过wds+mdt无人值守部署win11系统.doc
文章浏览阅读219次。python–xlrd/xlwt/xlutilsxlrd只能读取,不能改,支持 xlsx和xls 格式xlwt只能改,不能读xlwt只能保存为.xls格式xlutils能将xlrd.Book转为xlwt.Workbook,从而得以在现有xls的基础上修改数据,并创建一个新的xls,实现修改xlrd打开文件import xlrdexcel=xlrd.open_workbook('E:/test.xlsx') 返回值为xlrd.book.Book对象,不能修改获取sheett_xlutils模块可以读xlsx吗
文章浏览阅读8.2w次,点赞267次,收藏656次。运行Selenium出现'WebDriver' object has no attribute 'find_element_by_id'或AttributeError: 'WebDriver' object has no attribute 'find_element_by_xpath'等定位元素代码错误,是因为selenium更新到了新的版本,以前的一些语法经过改动。..............._unresolved attribute reference 'find_element_by_id' for class 'webdriver
文章浏览阅读198次。一:模态窗口//父页面JSwindow.showModalDialog(ifrmehref, window, 'dialogWidth:550px;dialogHeight:150px;help:no;resizable:no;status:no');//子页面获取父页面DOM对象//window.showModalDialog的DOM对象var v=parentWin..._jquery获取父window下的dom对象
文章浏览阅读1.7w次,点赞15次,收藏129次。算法(algorithm)是解决一系列问题的清晰指令,也就是,能对一定规范的输入,在有限的时间内获得所要求的输出。 简单来说,算法就是解决一个问题的具体方法和步骤。算法是程序的灵 魂。二、算法的特征1.可行性 算法中执行的任何计算步骤都可以分解为基本可执行的操作步,即每个计算步都可以在有限时间里完成(也称之为有效性) 算法的每一步都要有确切的意义,不能有二义性。例如“增加x的值”,并没有说增加多少,计算机就无法执行明确的运算。 _算法
文章浏览阅读1.5k次,点赞18次,收藏26次。网络安全的标准和规范是网络安全领域的重要组成部分。它们为网络安全提供了技术依据,规定了网络安全的技术要求和操作方式,帮助我们构建安全的网络环境。下面,我们将详细介绍一些主要的网络安全标准和规范,以及它们在实际操作中的应用。_网络安全标准规范